|
Home
Products
Offices
Literature
Quick-Ship
Sales Inquiries
Contact Us
History
Employment
Code
of Ethics
PRC Manufacturing License
ASME & NBCA
Software
Updates
Rep/OEM
Standard Version Download
|
 |
Aerofin® Type C
Standard 5/8"
OD tube coil for heating and cooling |
| Type C coils are the
standard spiral fin water coils, used for both heating and
cooling applications. A typical latent and sensible cooling load
requires from 4 to 12 rows of aluminum or copper fin surface.
Standard construction includes threaded connections on carbon
steel or non-ferrous supply and return headers. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type CD
Standard 5/8" OD tube coil with
intermediate drain headers for heating and cooling |
| Similar
to type C coils, type CD coils feature intermediate drain
headers located on the rows between the supply and return
headers. The intermediate drain headers enhance drain ability
and help coils drain more quickly and thoroughly. Coils are
meant to be installed pitched towards the header end. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type R
Cleanable 5/8" OD tube coil with
dual removable headers for heating and cooling |
| Type
R coils differ from type C coils in that removable headers are
supplied instead of manifolds. This design allows access to the
internal tubes for inspection and cleaning from either end of
the coil. The headers are internally baffled to direct the fluid
flow for numerous circuiting options, with vents and drains
provided in the individual compartments.
This coil type
falls within the scope of ARI standard 410 Certified Ratings.
|
Top of page
 |
Aerofin®
Type RC
Cleanable 5/8" OD tube coil with
a single removable header for heating and cooling |
| Similar
to type R coils, type RC coils have removable header on the
piping connection end only. The opposite end has return bends,
making the type RC coil very useful in applications where access
is limited. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type CP (P-Fin)
Standard 5/8" OD tube coil for
heating and cooling |
| Similar
to Type C coils, type CP coils feature ˝” high fins which
deliver enhanced heat transfer in a given face area with
extremely low air friction and enhanced moisture carryover
minimization. Standard construction includes threaded
connections on carbon steel or non-ferrous supply and return
headers. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type CDP (P-Fin)
Standard 5/8" OD tube coil with
intermediate drain headers for heating and cooling |
| Similar
to type CP coils, type CDP coils feature intermediate drain
headers located on the rows between supply and return headers.
The intermediate drain headers enhance drain ability and help
coils drain more quickly and thoroughly. Coils are meant to be
installed pitched towards the header end. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
Top
of page
 |
Aerofin®
Type RP (P-Fin)
Cleanable 5/8" OD tube coil with
dual removable headers for heating and cooling |
| Similar
to type R coils, type RP coils feature ˝” high fins which
deliver enhanced heat transfer in a given face area with
extremely low air friction and reduced moisture carryover.
Removable headers allow access to the internal tubes for
inspection and cleaning from either end of the coil. The headers
are internally baffled to direct the fluid flow for numerous
circuiting options, with vents and drains provided in the
individual compartments. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type RCP (P-Fin)
Cleanable 5/8" OD tube coil with
a single removable header for heating and cooling |
| Similar
to type RP coils, type RCP coils have a removable header only on
the piping connection end. The opposite end has return bends,
making the type RCP coil very useful in applications where
access is limited. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type CH
Standard 5/8" OD tube coil for
heating and cooling |
| Type CH
coils are designed for use with hot water, glycols, or steam and
are available in 1 or 2 row configurations. Standard
construction is carbon steel supply and return headers and
threaded connections. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
Top
of page
 |
Aerofin®
Type MP
5/8" OD tube duct booster coil
for heating |
| Type
MP duct booster coils are for use with hot water or steam,
available in 1 or 2 row configurations. Threaded female
connections are provided at the inlet and outlet tube locations
in lieu of manifold headers. This coil type
falls within the scope of ARI standard 410 Certified Ratings.
|
 |
Aerofin®
Type FNF
5/8" OD tube non-freeze steam coil
for heating |
| Type
FNF steam coils are designed for freezing air, heating
applications. The non-freeze design is accomplished with
inner-distributing tubes (tube within a tube construction).
Outer finned tubes are 5/8” OD. Tubes are pitched in two
directions within the casing for positive condensate drainage in
either horizontal airflow or vertical airflow mounting
positions. Type FNF coils are available with 1 or 2 rows and are
typically used for applications with low to moderate steam
condensate loads. This coil type
falls within the scope of ARI standard 410 Certified Ratings.
|
 |
Aerofin®
Type ANF
1" OD tube non-freeze steam coil for
heating |
| Similar to FNF
coils, type ANF steam coils use 1” OD finned outer tubes. It
features tube within a tube construction, and tubes pitched in
two directions for horizontal or vertical airflow. Type ANF
coils are available with 1 or 2 rows and are used for
applications with high steam condensate loads. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
Top
of page
 |
Aerofin®
Type CHP (P-Fin)
5/8" OD tube hot water coil with
1/2" high fins for heating |
| Type CHP
coils are designed for use with hot water, glycols, or steam and
are available in 1 or 2 row configurations. Standard
construction is carbon steel supply and return headers and
threaded connections. 1/2” high fins deliver enhanced heat
transfer in a given face area with extremely low air friction. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type CHS
5/8" OD tube steam coil for heating |
| Type CHS heating
coils are especially designed steam coils for use with entering
air temperatures above freezing, and are available in a 2 row
configuration. Standard construction is carbon steel supply and
return headers, return bends and threaded connections. Center
supply connection ensures even steam distribution. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
 |
Aerofin®
Type FLEX
5/8" OD tube steam coil for heating
with flexible tubes for thermal expansion and contraction |
| Type FLEX coils are
5/8” OD tube steam coils for demanding applications where
frequent cycling occurs due to intermittent operation. The
“S” shaped tubes absorb the thermal expansion and
contraction without causing undue stress to the joints. Standard
construction is carbon steel supply and return headers (opposite
end) and threaded connections. Type FLEX coils are available
with 1 or 2 rows and are typically used for applications with
low to moderate steam condensate loads. This coil type
falls within the scope of ARI standard 410 Certified Ratings. |
Top
of page
 |
Aerofin®
Type AFLEX
1" OD tube steam coil for heating
with flexible tubes for thermal expansion and contraction |
| Similar to type FLEX
coils, AFLEX coils use 1” OD finned tubes. The “S” shaped
tubes absorb the thermal expansion and contraction without
causing undue stress to the joints. Standard construction is
carbon steel supply and return headers (opposite end) and
threaded connections. Type AFLEX coils are available with 1 or 2
rows and are typically used for applications with high steam
condensate loads. |
 |
Aerofin®
Type DP
5/8" OD tube coil for cooling with
refrigerant |
| Type DP coils are
direct expansion type (using refrigerant) which employ
distributors that disperse refrigerant equally to all multiple
circuits. Parallel/reverse flow ensures superheat. Standard
construction is non-ferrous suction header(s), return bends and
sweat connections. Equivalent plate fin coil is denoted as Type
E. |
 |
Aerofin®
Type ASH
1" OD outer tubes and 5/8" OD
inner distributing tubes for boiler air preheating, removable
core, same end connections |
| Type ASH coils are
used for heating with steam and feature a "removable
core" design. This enables the coil to become an easily
replaceable unit contained in a permanently mounted frame.
Standard construction is carbon steel or stainless steel header,
carbon steel or stainless steel tubes, embedded fins, welded
joints, plugged tube ends and same end connections. |
Top
of page
 |
Aerofin®
Type LRB
1" OD tube coil for heating and
cooling with large volumes of heating or cooling medium |
| Similar
to Type C coils, Type LRB coils feature 1” OD tubes. Type LRB
coils are for heating and cooling using water, steam or other
heat transfer liquid. Although generally used for boiler air
preheating, this coil readily handles large quantities of
heating and cooling fluid. High temperature and pressure designs
are available with special sizes and configurations and
materials to meet specific requirements.
|
 |
Aerofin®
Type PDRC and PDRP
1" OD tube coil for heating and
cooling with large volumes of liquid or steam, cleanable tubes |
| Type PDRC and
PDRP coils feature 1” OD tubes and removable cover plate
(PDRC) or plugs (PDRP). This design allows access to the inside
of the tubes for inspection and cleaning. Compatible with hot
water, glycols, oils, gas and steam, this coil is available in
special high pressure/temperature designs (up to 1500 psig). |
Top
of page
 |
Aerofin®
Process Gas Coolers/Heaters
Transition unit for cooling or heating
process gas. |
| These
units are specifically designed for the temperatures, pressures
and environments to which they will be exposed. The gastight
removable core allows heat exchange elements to be readily
cleaned, inspected or replaced without the need to replace the
entire unit. Process Gas Coolers/Heaters are provided with
transitions on both ends to mate to process piping. Aerofin
designs each transition to properly distribute the air across
the finned tube bundle and minimize pressure drop. |
Top
of page
 |
Aerofin®
Transformer Oil Coolers
Fan/coil unit specifically designed to
cool transformer oil. |
| Transformer
Oil Coolers are specifically designed for the transformer make
and model, and the operating conditions. Each cooler unit
consists of a coil and cabinet containing one or more direct
drive propeller type fans. Standard construction is copper
tubes, aluminum or copper fins, roller expanded tube joints,
welded carbon steel box headers and threaded connections.
Turbulators are used inside the tubes to enhance heat transfer
when required. |
Top
of page
 |
Aerofin®
Fan/Coil Units
Fan and Coil units for cooling liquid
with ambient air. |
| Fan/Coil
Units consist of one or more heavy-duty coils fitted with
cabinet housing fans for cooling water, glycols, oils, and other
fluids. Typical applications are dry cooling tower cooling,
engine jacket water cooling and process water cooling. Fans,
motors and coils are selected specifically for the environment
in which they are to operate. |
Top
of page
 |
Aerofin®
Nuclear, Safety Related Coils
Nuclear, Safety Related and Non-Safety
Related coils available with various ASME Stamps. |
| Aerofin
maintains essential quality assurance controls for all Safety
Related (and Non-Safety Related) equipment requirements
including 10CFR50-Appendiz B, ASME Section III (Class 2 or 3),
and ASME Section VIII, Division 1. Aerofin holds the ASME
"N" and "NPT" certificates for ASME Section
III, Class 2 and Class 3 pressure vessels, as well as a
Certificate of Authorization to U-stamp ASME Section VIII,
Division 1 pressure vessels. Coils are available in virtually
any commercial alloy with heavy duty seismic construction and
total access to internals for maintenance and inspection. |
Top
of page
|
